Sport synthetic grass introduction:
IN-Free artificial grass is high density artificial grass for sports filed, the grass need not fill rubber & sand.
For most of the artifial grass fields, it need rubber & sand filled to create a comfortable playground for players. The filled rubber & sand can protec players when they have a slide or fall.
Some high end players perhaps want to have better feeling field which is more comfortable to compare with rubber & sand filled fields. In order fulfill the target, IN-Free artificial grass is introduced, it adopts stronger mono-filament + curly yarn and higher density, then the design can ensure final grass is thick enough to support players enjoy their sports.
Sport synthetic grass specifications/technical parameters
Two Sided Tendons
14/cm - 21/cm
PP cloth+ non woven cloth or net farbrics& SBR Glue
Water proof PP bag
2m or 4m
Our standard is 25Meter
25 days/ 2 X 40'HQ
Sport synthetic grass feature and photos
1) Easy to shape and install .
2) Good rebound resilience, abrasion resistance, minimized distortion and shrinkage and excellent sports performance.
3) Excellent UV-stability: strong color fastness, it offer a guarantee of 5-6 years for no fade.
4) Water savings, no pollution and pesticides
5) Specification can be adjusted according to the customer's request.
1.Simple maintenance work with low cost
2.Usable in all-weather condition
3.It can be frequently used with consistent performance for a long time, which greatly improves the efficiency of space
4.Simulate the natural turf, comparable with the natural grass
5.High wear resistance and high environment protection performance
How to install Sport synthetic grass?
Prepare Natural Ground for Artificial Turf ( If on cement floor, please start from 2)
1.Remove any existing grass with a flat shovel or turf cutter.
2.Compact the ground with a vibrating plate compactor.
3.Lay a non-woven cloth over the ground.
Lay the Artificial Grass
4.Cut the roll of artificial turf into lengths that fit the shape of your yard.
5.Lay the turf over the area in its permanent place. Make sure adjoining seams fit together without any visible gaps, but do not overlap them.
6.Cut the edges of the artificial turf to fit the edges of the lawn. Use a utility knife to cut the grass from its underside adhere the Joints.
7.Peel back the joints between the artificial grass strips along their length. Reveal enough of the underlying ground to fit the joint tape with an inch or two to spare on each side.
8.Lay the joint tape in the gap you have created so that, when laid, the seam between the two adjacent strips of artificial turf will run down its middle.
9.Paint the joint tape with the glue.
10.Lay the edges of the adjoining artificial grass pieces over the joint tape and adhesive so that they are in their original and permanent position. Weigh the joint down with sandbags.
11.Repeat for each of the joints in the turf. Options for Adhering the Edges of the Artificial Grass
12.Nail down the edges of artificial turf on natural ground.
13.Apply the joint tape around the edges of artificial turf laid over concrete. (See step 10) Spread the Infill if required.
14.Spread the recommended amount of infill evenly over the artificial grass.
15.Rake the infill over the artificial turf to work it underneath the surface.
16.Allow it to settle overnight.
17.Spread and rake in more infill if necessary, until the space between the sub layer and the bottom of the artificial grass is filled.
Q: How can I get samples?
A: Free samples are available, please send us your Freight collect account number, post code, consingee address, consingee name, phone number.
Q: How can I visit your company?
A: Welcome to our company. You can take plane to Qingdao Airport, then we will go to pick you up.
Q: What is your MOQ?
A: Our MOQ is 500 square meter each type.